Dell 3110cn Color Laser Printer - Manual (Page 217)

CAUTION: Do not use excessive force on the tray. Doing so could damage the tray or the
inside of the printer.
Removing Print Jams From the Fuser
NOTICE: Make sure nothing touches or scratches the surface (black-colored film) of the belt unit.
Scratches, dirt, or oil from your hands on the film of the belt unit may reduce print quality.
NOTICE: To protect the drums of the print cartridges against bright light, close the front cover within
5 minutes. If the front cover remains open for more than 5 minutes, print quality may deteriorate.
NOTE: To resolve the error displayed on the operator panel, you must clear all print media from the
print media path.
Turn off the printer and wait for 30 minutes. 1.
Push the side button and open the front cover. 2.
Lift the levers at both ends of the fuser, and remove the jammed paper. If any jammed paper cannot
be found, go to the next step. 3.