Dell 3110cn Color Laser Printer User Manual
Page 257
10.
NOTE:
If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a.
Right-click Wireless Network Connection and select Properties.
b.
Select the Wireless Network tab.
c.
Click Advanced.
d.
Do either of the following:
e.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Select the setting that you send to the printer in the list in Preferred Network group.
f.
Click Move up to move the setting to the top of the list.
g.
Click OK to close the Property dialog box.
h.
For Windows Vista:
Open Control Panel.
a.
Select Network and Internet.
b.
Select Network and Sharing Center.
c.
Select Connect to a network.
d.
Select the original setting from the network items listed in Connect to a network, and then
click Connect.
e.
On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the printer to
which the wireless setting is set, and then click Install.
11.
12.