Dell 3110cn Color Laser Printer - Manual (Page 165)

Init PrintMeter
Purpose:
To initialize the data for the print meter. When initializing the data on the print meter, the value of the meter
resets to 0.
Reset Defaults
Purpose:
To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the
menu parameters, except the parameters for the network, are reset to their default values.
Clear Storage
Purpose:
To clear all files that are stored as Secure, Store, and Proof Print in the RAM disk.
NOTE: The Clear Storage menu is only displayed when 256 MB or more of additional print memory
is installed on the printer and then the RAM Disk menu is set to Enable.
Non-Dell Toner
NOTICE: When Non-Dell toner is used, the printer may be severely damaged and may not be
covered by your warranty.
Purpose:
To specify whether to use the refilled print cartridge or not. When this setting is on, you can use print
cartridges provided by other companies.
Values:
On
Enables the use of refilled print cartridges.
Off*
Disables the use of refilled print cartridges.