Usb settings – Dell 3110cn Color Laser Printer User Manual
Page 154
Purpose:
To specify PostScript communication protocol for the parallel interface. The change becomes effective after
the printer is turned off and then on again.
Values:
Auto
Used when auto-detecting the PostScript communication protocol.
Standard
Used when the communication protocol is in ASCII format.
BCP
Used when the communication protocol is in binary format.
TBCP*
Used when the communication protocol supports both ASCII and binary data to switch between
them according to the specified control code.
Binary
Used when no special processing is required.
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Adobe Protocol
Purpose:
To specify PostScript communication protocol for each interface. The change becomes effective after the
printer is turned off and then on again.
Values: