Dell 3110cn Color Laser Printer - Manual (Page 94)

g.
h.
Click Move up to move the setting to the top of the list. i.
Click OK to close the Property dialog box. j.
On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the printer to
which the wireless setting is set, and then click Install. 11.
If you select the I am setting up this printer on server check box on the Select Printer screen and
also select the PostScript Driver check box on the Enter Printer Settings screen, the Adobe
Systems Inc. License Agreement screen appears. Select the I accept the terms of the license
agreement option button, and then click Install. 12.
On the Congratulations! screen, click Finish to complete the installation. A test page will be printed
with the installed printer by clicking the Print Test Page button. 13.
Use the Dell Printer Configuration Web Tool to monitor the status of your network printer without
leaving your desk. You can view and/or change the printer configuration settings, monitor toner level, and
when it is time to order replacement consumables, just click the Dell supplies link right from your Web
browser.
NOTE: The Dell Printer Configuration Web Tool is not available when the printer is locally attached
to a computer or a print server.
Wireless Installation using wireless connection
Scene 1. Install a printer to the already-operating wireless network
(When wireless setting is already set to your computer)
Insert the Drivers and Utilities CD into your computer to launch the installation software. 1.
NOTE: If the CD does not automatically launch, click Start Run, and then type D:\setup.exe
(where D is the drive letter of your CD), and then click OK.
NOTE: For Windows Vista, click Continue when the User Account Control dialog box appears.
2. Select the Network Installation option button, and then click Next.
Select the Configure Wireless Printer using a wireless connection (Advanced) option button,
and then click Next. 3.
Reset the wireless setting of the printer following the steps on the Reset Wireless Setting screen. 4.
Create the wireless setting of your computer following the steps shown on the Enable
Communication with Printer screen, and then click Next. 5.
NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
The steps are as follows.
a.