Dell 3110cn Color Laser Printer - Manual (Page 259)

c.
checked.
d.
NOTE: Be sure to write down the current wireless computer settings in steps d and f so that you
can restore them later.
Click the Advanced button. e.
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box. f.
Click the Add button to display Wireless network properties. g.
Under the Association tab, enter the following information and click OK. h.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
Click the Move up button to move the newly added SSID to the top of the list. i.
Click OK to close the Property dialog box. j.
For Windows Vista:
Open Control Panel. a.
Select Network and Internet. b.
Select Network and Sharing Center. c.
Select Connect to a network. d.
Select dell_device from the network items listed in Connect to a network. e.
Select Connect Anyway in the warning dialog box indicating you are entering an unsecured
area. f.
Click Close in the dialog box after confirming the connection is a success. g.
On the Enter Wireless Network Settings screen, set each wireless setting item, and then click
Next. 6.
When you select the Fixed IP option button for IP Address assignment, click Change... and enter
the IP address and subnet mask on the screen. 7.
NOTE: When you enter a fixed IP address, avoid the "169.254.xxx.xxx" address used by AutoIP.
Set each item on the Enter Printer Settings screen, and then click Next. 8.
9.