Dell 3110cn Color Laser Printer - Manual (Page 26)

Paper Tray Specifies the input tray.
Paper Size Specifies the default paper size.
Custom Size - Y Specifies the length of paper. The available range is from 98 mm (3.89 in.) to 355 mm
(13.98 in.).
Custom Size - X Specifies the width of paper. The available range is from 77 mm (3.03 in.) to 220 mm
(8.66 in.).
Orientation Specifies how text and graphics are oriented on the page.
2 Sided Sets duplexing as the default for all print jobs. This item is only available when the
optional duplexer is installed.
Font Specifies the default font from the registered fonts in the printer.
Symbol Set Specifies a symbol set for a specified font.
Font Size Specifies the font size for scalable typographic fonts.
Font Pitch Specifies the font pitch for scalable monospaced fonts.
Form Line Specifies the number of characters in a line.
Quantity Sets the number of copies you want for the printer default value.
Image
Enhancement Specifies whether to perform the image enhancement feature.
Hex Dump Specifies whether to help isolate the source of a print job problem. With Hex Dump
selected, all data sent to the printer is printed in hexadecimal and character
representation. Control codes are not executed.
Draft Mode Specifies whether to print in the draft mode.
Line
Termination Sets the line termination.
Default Color Specifies the color mode to Color or Black . This setting is used when the color
printing mode setting is not specified for the print job that is sent to the printer.
PS Settings
Purpose:
To change printer settings that only affect jobs using the PostScript emulation printer language.
Values:
PS Error Report Specifies whether the printer outputs error contents for a PostScript error.
PS Job Time-Out Specifies the execution time for one PostScript job.
Paper Select Mode Specifies the way to select the tray for the PostScript mode.