Dell 3110cn Color Laser Printer - Manual (Page 51)

NOTE: If IPsec is enabled with incorrect settings, you must disable it using the Reset IPsec menu on
the operator panel.
Reset Print Server
Purpose:
To initialize NVRAM for the network feature and reboot the printer. You can also initialize the printer's
NVRAM from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM and
restart printer Click the Start button to initialize NVRAM. Network settings will revert to the
factory default settings and reboot the network capability.
Restart Printer Click the Start button to reboot printer.
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report
pages.
Copy Printer Settings
Purpose:
To copy the printer settings to one or more of the same model of printer.
To copy the settings to another printer, specify the IP address and password of the printer to which the
settings are copied in the IP Address text box and Password text box. Then, click the Copy the settings
to the Host in the above list button. Copying the settings is complete. The connection time-out period is
60 seconds. After that, you can check whether settings were copied or not on this page. And you need to
check the Copy the settings to the Host in the above list and reboot the machine menu of the Dell
Printer Configuration Web Tool in the destination printer to verify if settings were actually copied or not.
If the settings can be copied but printer configuration is different, the settings of only the same items are
copied. Printer settings are simultaneously copied to printers of up to 10 IP addresses.
Copy Printer Settings Report
Purpose:
To verify the histories of copying after turning on the printer.
Print Volume
The Printer Volume menu includes the Print Volume and Dell ColorTrack pages.
Print Volume
Purpose: