Dell 3110cn Color Laser Printer - Manual (Page 24)

Stored Documents Click the Start button to print the stored documents list.
This item is only available when the Ram disk is set to on.
Printer Settings
The Printer Settings tab includes System Settings , Parallel Settings , Network Settings, USB
Settings , PCL Settings , PS Settings , and Panel Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver Timer
Mode 1 Specifies the amount of time before the printer enters the power saver timer mode
1 after it finishes a print job in minutes between 5 and 60.
Power Saver Timer
Mode 2 Specifies the amount of time before the printer enters the power saver timer mode
2 after it finishes a print job in minutes between 1 and 6.
Alert Tone Specifies whether the printer sounds an alarm when an error occurs.
Time-Out Specifies the amount of time the printer waits to receive additional bytes of data
from the computer. When this timeout expires, the print job is canceled.
Panel Language Determine the language of the text on the operator panel screen.
Auto Log Print Specifies whether the printer outputs logs automatically.
Print ID Specifies a location where the user ID is printed.
Print Text Specifies whether the printer outputs PDL data, which is not supported by the
printer, as text when the printer receives it.
Banner Sheet
Insert Position Specifies the position of banner sheet.
Banner Sheet
Specify Tray Specifies the tray in which the banner sheet is loaded.
RAM Disk Specifies whether to allocate memory to the RAM disk file system for the Secure
Print and Store Print features.
This item is only available when the 256 MB, or higher, optional memory card is
installed.
Substitute Tray Specifies whether or not to use another size paper when the paper that is loaded in
the specified tray does not match the paper size settings for the current job.
mm/inch Specifies the measurement unit on the operator panel screen as either mm or
inches.
Parallel Settings