Dell 3110cn Color Laser Printer - Manual (Page 229)

Toner smears or print
comes off page. · If you are printing on an uneven print surface, change the Paper Type
settings in the Tray Settings menu. See " System Settings ".
· Verify that the print media is within the printer specifications.
· The fuser is old or damaged. Replace the fuser. See "
Replacing the Fuser ".
Toner spots appear on
the page/printing is
blurred. · Check the print cartridges to make sure they are installed correctly.
· Change the print cartridges. See "
Replacing Print Cartridges ."
Entire page is white. · Make sure the packaging material is removed from the print cartridges.
· Check the print cartridges to make sure they are installed correctly.
· The print cartridges may be low or need to be replaced. Confirm the amount
of toner in each print cartridge and replace it with a new one if necessary.
See "
Replacing Print Cartridges ."
Streaks appear on the
page. · The print cartridges may be low or need to be replaced. Confirm the amount