Dell 3110cn Color Laser Printer User Manual
Page 238
10.
11.
Press
to get to Paper Type.
12.
Press
to select Paper Type.
13.
Press
to get to Tray 1.
14.
Press
to select Tray 1.
15.
Using
and
, select the appropriate paper type (Plain 1).
16.
Press SELECT, once Plain 1 is displayed on the lower line.
17.
Now we have the Tray 1 Type set to Plain 1.
18.
Now press MENU to get back to Ready to Print.
19.
Now insert the Letter-sized stack of paper into the Tray 1.
20.
On the screen Tray 1/Letter will appear. (ONLY ON 3x00cn)
21.
Press SELECT to confirm this. (ONLY ON 3x00cn)
22.
Now on the screen Tray 1/Plain 1 will appear.
23.
Press SELECT to confirm this.
24.
We now have all the hardware settings on the printer correct.
25.
Now, all software settings screen shots are from WORD, this was done in Word 2003. However if in any
application, you go File
Print and then click the Properties button, you will get this same driver
properties window.
Open up Word and create a new document.
26.
Go to File
Print.
27.
Select the Dell Color Laser Printer from the printers list.
28.
Click the Properties button to the right.
29.
This brings up Driver Properties.
30.
Click on the Paper Tray Tab.
31.
Change the Paper Source to Tray 1.
32.
Click the Paper Tab.
33.
Select in paper size, Letter.
34.
Select for Output Size, Same as Paper Size.
35.
Click OK.
36.
Click Close.
37.
38.
39.