Dell 3110cn Color Laser Printer - Manual (Page 258)

11.
NOTE: If your system has any of the following operating systems:
Windows XP x64
Windows Server
® 2003 x64
Windows Vista x64
Windows Vista x86
,skip step 12 and go to step 13.
If you select the I am setting up this printer on a server check box on the Select Printer screen
and also select the PostScript Driver check box on the Enter Printer Settings screen, the Adobe
Systems Inc. License Agreement screen appears. Select the I accept the terms of the license
agreement option button, and then click Install. 12.
On the Congratulations! screen, click Finish to complete the installation. A test page will be printed
with the installed printer by clicking the Print Test Page button. 13.
Scene 2. Construct new wireless network environment for both computer
and printer (When wireless setting needs to be set to your computer)
Insert the Drivers and Utilities CD into your computer to launch the installation software. 1.
NOTE: If the CD does not automatically launch, click Start Run, and then type D:\setup.exe
(where D is the drive letter of your CD), and then click OK.
NOTE: For Windows Vista, click Continue when the User Account Control dialog box appears.
Select the Network Installation option button, and then click Next. 2.
Select the Configure Wireless Printer using a wireless connection (Advanced) option button,
and then click Next. 3.
Reset the wireless setting of the printer following the steps on the Reset Wireless Setting screen. 4.
Create the wireless setting of your computer following the steps shown on the Enable
Communication with Printer screen, and then click Next. The steps are as follows. 5.
NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel. a.
Right-click Wireless Network Connection and select Properties. b.
Select the Wireless Networks tab. c.
Make sure the check box for Use Windows to configure my wireless network settings is d.