Dell 3110cn Color Laser Printer User Manual
Page 49
3.
4.
Enter "0.0.0.0 " in the Address field and "0.0.0.0 " in the Address Mask field.
5.
Select Permit .
6.
Click Apply New Settings .
7.
Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168 " network address and disable printing from the "192.168.200 "
network address. However, the example below describes how to enable printing from the "192.168.200.10 "
IP address.
Procedures:
Click the first column of the Access List row 1 .
1.
Enter "192.168.200.10 " in the Address field and "255.255.255.255 " in the Address Mask field.
2.
Select Permit .
3.
Click the first column of the Access List row 2 .
4.
Enter "192.168.200.0 " in the Address field and "255.255.255.0 " in the Address Mask field.
5.
Select Reject .
6.
Click the first column of the Access List row 3 .
7.
Enter "192.168.0.0 " in the Address field and "255.255.0.0 " in the Address Mask field.
8.
Select Permit .
9.
Click Apply New Settings .
10.
Other Features
The Other Features tab includes Set Password , Security , IPsec and Reset Print Server pages.
Set Password
Purpose:
To set or change the password that is required to access the printer setup parameters from the Dell Printer
Configuration Web Tool .
Set the password of the operator panel from Panel Settings in the Printer Settings . This page can also be
displayed by clicking Set Password in the Left Frame.
NOTE:
To restore the password to default (NULL), initialize the NVM memory.
Values: