Dell PowerEdge VRTX - Manual (Page 110)

Error Code Message Information
PST0143
Message Intel Trusted Execution Technology (TXT) fatal error.
LCD Message Intel Trusted Execution Technology (TXT) fatal error.
Details TXT boot failed. This could be related to memory errors or an error
with the system TXT configuration. A socketed TPM module may
have been removed.
Action Check TPM presence. Remove and reapply input power. If the issue
persists, see
Getting Help .
PST0192
Message Shut-down test failed.
LCD Message Shut-down test failed. Power cycle system.
Details System BIOS shutdown test failed during POST.
Action Check system event log for CMOS battery exceptions. Remove and
reapply input power. If the issue persists, see
Getting Help .
PST0193
Message BIOS POST memory test failed.
LCD Message BIOS POST memory test failed. Check memory devices.
Details System BIOS POST memory test failed.
Action Compare system memory installation to supported system memory
configurations. Reduce system configuration to minimum memory
configuration.
PST0194
Message Remote access controller configuration failed.
LCD Message Remote access controller configuration failed. Check screen
message.
Details System BIOS could not configure the Remote Access controller.
Action Cycle input power and power on the system. If the issue persists, see
Getting Help .
PST0195
Message CPU configuration failed.
LCD Message CPU configuration failed. Check screen message.
Details The current processor configuration is unsupported or encountered a
fatal exception during POST.
Action Review system processor configuration and reduce the system to the
minimum configuration.
PST0196
Message Incorrect memory configuration.
110