Dell PowerEdge VRTX - Manual (Page 135)

Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0210
Message The memory module < number > < name > voltage is outside of range.
LCD Message Memory module < number > < name > voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0212
Message The disk drive bay < name > voltage is less than the lower warning
threshold.
LCD Message The disk drive bay < name > voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help .
VLT0213
Message The disk drive bay < name > voltage is less than the lower critical
threshold.
LCD Message The disk drive bay < name > voltage is outside of range.
135