Dell PowerEdge VRTX - Manual (Page 115)

Error Code Message Information
Action If unintended, review system configuration changes and power
policy.
PWR1006
Message The system halted because system power exceeds capacity.
LCD Message System power demand exceeds capacity. System halted.
Details The system halted because system power exceeds capacity.
Action Review system configuration, upgrade power supplies or reduce
system power consumption.
PWR1007
Message The system performance degraded because power exceeds
capacity.
LCD Message System power exceeds capacity. Performance degraded. Check PSU
configuration.
Details The system is currently operating in a performance degraded state to
attempt protect from a power shutdown.
Action Review system configuration, upgrade power supplies or reduce
system power consumption.
PWR1008
Message The system performance degraded because power draw exceeds the
power threshold.
LCD Message System power exceeds threshold. Performance degraded. Check
PSU configuration.
Details The power threshold is configured by the user or automatically by
software based on system configuration.
Action Review system configuration, upgrade power supplies or reduce
system power consumption.
RFM1003
Message Removable Flash Media < name > is not IPMI-function ready.
Details The removable flash media is installed but improperly configured or
failed to initialize.
Action If unintended, reinstall the flash media and module.
RFM1005
Message Removable Flash Media < name > is not ready.
Details The media is being prepared or is under maintenance. If the problem
persists, reinstall the card.
Action Wait for the media to be ready.
115