Dell PowerEdge VRTX - Manual (Page 89)

Error Code Message Information
Action
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
Getting Help .
CPU0804
Message The power input for CPU < number > voltage regulator module is
outside of range.
LCD Message The power input for CPU < number > voltage regulator module is
outside of range. Re-seat module.
Details System performance may be degraded or the system may fail to
operate.
Action
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
Getting Help .
CPU0805
Message The power input for CPU < number > voltage regulator module is
outside of range, but it is attached to the system.
Details System performance may be degraded or the system may fail to
operate.
Action
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
Getting Help .
CPU0806
Message CPU < number > voltage regulator module is incorrectly configured.
LCD Message CPU < number > voltage regulator module incorrectly configured.
Check configuration.
Details System performance may be degraded or the system may fail to
operate.
Action Review this manual for proper configuration and installation
procedures.
CPU0816
Message CPU < number > voltage regulator module is absent.
LCD Message CPU < number > voltage regulator module absent. Check module.
89