Dell POWEREDGE M1000E - Manual (Page 103)

Fabric OS MIB Reference 85
53-1001768-01
fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4
3
fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4
The desired operational mode of the Fx_Port.
NOTE
This object is read-only. It is listed incorrectly in the MIB definition as read-write.
Fx_Port Physical Level Table
This table contains the physical level status and parameters of the Fx_Ports, one entry for each
Fx_Port in the fabric element.
fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2
A table that contains the physical level status and parameters of the Fx_Ports, one entry for each
Fx_Port in the fabric element.
fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1
An entry containing physical level status and parameters of an Fx_Port.
fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1
The desired state of the Fx_Port. A management station might place the Fx_Port in a desired state
by setting this object accordingly.
Values Possible values are:
1: online (1)
2: offline (2)
3: testing (3)
The testing state (3) indicates that no operational frames can be passed. When a fabric element
initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of
either explicit management action or per configuration information accessible by the fabric
element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or
remains in the offline state (2).
NOTE
This object is read-only. It is listed incorrectly in the MIB definition as read-write.
fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2
The current operational status of the Fx_Port.
Values Possible values are: