Dell POWEREDGE M1000E - Manual (Page 148)

130 Fabric OS MIB Reference
53-1001768-01
entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16
4
If write access is implemented for an instance of entPhysicalAssetID and a value is written into the
instance, the agent must retain the supplied value in the entPhysicalAssetID instance associated
with the same physical entity for as long as that entity remains instantiated. This includes
instantiations across all re-initializations/reboots of the network management system, including
those that result in a change of the physical entity’s entPhysicalIndex value.
If no asset tracking information is associated with the physical component, then this object
contains a zero-length string.
Set to empty string.
entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16
The entPhysicalIsFRU object indicates whether this physical entity is considered a field replaceable
unit by the vendor. If this object contains the value “true (1),” then this entPhysicalEntry identifies a
field replaceable unit. For all entPhysicalEntries representing components that are permanently
contained within a field replaceable unit, the value “false (2)” should be returned for this object.
Set to True (1) for FRU entries (port blades, CPs, sensors, power supplies, and fans; False (2) for
container and chassis type entries.
Logical Entity group
Not supported.
entLogicalTable 1.3.6.1.2.1.47.1.2.1
This table contains one row per logical entity. For agents that implement more than one naming
scope, at least one entry must exist. Agents that instantiate all MIB objects within a single naming
scope are not required to implement this table.
entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1
Information about a particular logical entity. Entities might be managed by this agent or other
SNMP agents in the same chassis.
Index entLogicalIndex
entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1
The value of this object uniquely identifies the logical entity. The value should be a small positive
integer; index values for different logical entities are not necessarily contiguous.
entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2
A textual description of the logical entity. This object should contain a string that identifies the
manufacturer’s name for the logical entity and should be set to a distinct value for each version of
the logical entity.