Dell POWEREDGE M1000E User Manual
Page 282
264
Fabric OS MIB Reference
53-1001768-01
connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6
8
connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6
The number of octets or bytes that have been transmitted by this port. There is an one-second
periodic polling of the port. This value is saved and compared with the next polled value to compute
net throughput.
connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7
The number of octets or bytes that have been received by this port. There is an one-second periodic
polling of the port. This value is saved and compared with the next polled value to compute net
throughput.
connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8
The number of transitions in or out of BB credit zero state.
connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9
Not supported.
The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer
credit transitioned to 0. There is no credit to provide to other side.
Return Value- 800000000
This is a Fibre Channel statistic only.
connUnitPortStatCountFBSYFrames 1.3.6.1.3.94.4.5.1.10
Not supported.
The number of times that FBSY was returned to this port as a result of a frame that could not be
delivered to the other end of the link. This occurs if either the fabric or the destination port is
temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection).
This is a Fibre Channel only statistic. This is the sum of all classes. If you cannot keep the by-class
counters, then keep the sum counters.
connUnitPortStatCountPBSYFrames 1.3.6.1.3.94.4.5.1.11
Not supported.
The number of times that PBSY was returned to this port as a result of a frame that could not be
delivered to the other end of the link. This occurs if the destination port is temporarily busy. PBSY
can only occur on SOFc1 frames (the frames that establish a connection).
Return Value- 800000000
This is a Fibre Channel only statistic. This is the sum of all classes. If you cannot keep the by class
counters, then keep the sum counters.