Dell POWEREDGE M1000E - Manual (Page 272)

254 Fabric OS MIB Reference
53-1001768-01
connUnitPortName 1.3.6.1.3.94.1.10.1.17
8
• Return values are:
- resetConnUnitPort portDisable (F or E_Port, loop for U_Port)
- bypassConnUnitPort portDisable (FL_Port)
- unbypassConnUnitPort portEnable (FL_Port)
- offlineConnUnitPort portDisable (E, F, FL_Port)
- onlineConnUnitPort portEnable (U)
- resetConnUnitPortCounters clear the port statistics counter. When rebooted, this
defaults to 1 (unknown).
connUnitPortName 1.3.6.1.3.94.1.10.1.17
A string describing the addressed port.
This object is read-only for Brocade switches.
connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18
This is the internal port number by which this port is known. In many implementations, this should
be the same as connUnitPortIndex. Some implementations might have an internal port
representation not compatible with the rules for table indices. In these cases, provide the internal
representation of this port in this object. This value might also be used in the
connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the connUnitLinkTable.
The internal port numbers for Brocade switch. The Brocade switches support 0 through maximum
number of ports.
The maximum number of supported ports are as follows.
Brocade 300 24 ports
Brocade 4100 32 ports
Brocade 4900 64 ports
Brocade 5000 32 ports
Brocade 5100 40 ports
Brocade 5300 80 ports
Brocade 7500 or 7500E 32 ports
Brocade 7600 16 ports
Brocade 7800 Extension Switch 24 ports
Brocade 8000 32 ports
Brocade Encryption Switch 32 ports
Brocade DCX 576 ports
Brocade DCX-4S 288 ports
Brocade 48000 384 ports