Dell POWEREDGE M1000E - Manual (Page 258)

240 Fabric OS MIB Reference
53-1001768-01
connUnitProduct 1.3.6.1.3.94.1.6.1.7
8
• ok (3) - Healthy/ok
• warning (4) - Marginal/Warning
• failed (5) - Down/Failed
connUnitProduct 1.3.6.1.3.94.1.6.1.7
The connectivity unit vendor's product model name.
This is the same as for sysDescr (set for as many as 79 bytes).
If the switch is in Access Gateway mode, the default value is Access Gateway.
connUnitSn 1.3.6.1.3.94.1.6.1.8
The serial number for this connectivity unit.
Set to the SSN (which by default is the WWN).
connUnitUpTime 1.3.6.1.3.94.1.6.1.9
The number of centiseconds since the last unit initialization.
connUnitUrl 1.3.6.1.3.94.1.6.1.10
URL to launch a management application, if applicable; otherwise an empty string. In a standalone
unit, this would be the same as the top-level URL. This has the same definition as systemURL for
keywords.
(Same as systemURL.) The expected value for connUnitURL.0 is:
“http://{a.b.c.d}”
where {a.b.c.d} is the IP address of the switch if Web Tools license is available.
“” (null)
where “” is the IP address of the switch if Web Tools license is not available.
connUnitDomainId 1.3.6.1.3.94.1.6.1.11
24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If
this value is not applicable, return all bits to 1.
Set to the switch domain ID (as per FC-SW).
For a Brocade Access Gateway device, the value is hard coded as “11 11 11”. A Brocade Access
Gateway does not have a domain ID.
connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12
A value of “yes” means this is the proxy master unit for a set of managed units.