Dell POWEREDGE M1000E - Manual (Page 195)

Fabric OS MIB Reference 177
53-1001768-01
swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
5
swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
Indicates the link state of the port. When the port's link state changes, its operational status
(swFCPortOpStatus) is affected.
Values Possible values are:
• enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or
ports if it is in an FC-AL loop).
• disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports.
• loopback (3) The port might transmit frames through an internal path to verify the health of the
transmitter and receiver path.
swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7
Indicates the media transmitter type of the port.
Values Possible values are:
• unknown (1) Cannot determine the port driver.
• lw (2) Long wave laser.
• sw (3) Short wave laser.
• ld (4) Long wave LED.
• cu (5) Copper (electrical).
swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11
Counts the number of Fibre Channel words that the port has transmitted. You can convert words to
bytes by multiplying this value by 4.
swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12
Counts the number of Fibre Channel words that the port has received.
You can convert words to bytes by multiplying this value by 4.
swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13
Counts the number of Fibre Channel frames that the port has transmitted.
swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14
Counts the number of Fibre Channel frames that the port has received.