Dell POWEREDGE M1000E - Manual (Page 197)

Fabric OS MIB Reference 179
53-1001768-01
swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26
5
swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26
Counts the number of encoding error or disparity error outside frames received.
swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27
Counts the number of invalid ordered sets received.
swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28
Counts the number of Class 3 frames that the port has discarded.
swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29
Counts the number of multicast frames that have been timed out.
swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30
Counts the number of multicast frames that have been transmitted.
swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31
Counts the number of loop initializations that have been initiated by loop devices attached.
swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32
Counts the number of loop initializations that have been initiated by the port.
swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33
Indicates the physical address (AL_PA) of the loop device that initiated the last loop initialization.
swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34
The WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as
specified in FC-PH.
swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35
The desired baud rate for the port.
Values The baud rate can be 1 Gbps, 2 Gbps, autonegotiate, or 4 Gbps or 8 Gbps. 4 Gbps is only
applicable to the Brocade 4100, 4900, 7500, 7600, and 48000. 8 Gbps is only applicable to the
Brocade DCX director.