Dell POWEREDGE M1000E - Manual (Page 280)

262 Fabric OS MIB Reference
53-1001768-01
connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11
8
connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11
The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP
port.
ISL- IP port.
Device- 0 (Null).
connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12
Type of the FC connectivity unit, as defined in connUnitType.
• ISL- Switch device.
• End devices- End device types based on an FCP Inquiry.
Brocade does not support Hubs.
Table 23 display the types of the connectivity unit.
connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13
This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a
Big Endian value of 24 bits. If this is loop, then it is the AL_PA that is connected. If this is an E_Port,
then it contains only the domain ID. If this is an F_Port, then it contains both the area and domain
ID. If not any of those, unknown or cascaded loop, return all bits set to 1.
ISL- Port ID of the remote port.
Device- Port ID of the remote port.
connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14
The last-used link index.
Statistics group
Not supported in Fabric OS v2.6.1.
Port types are aggregated into a port type class, such as all the fabric port types.
Each individual port has only one statistics table. For all objects in the statistics table, if the object
is not supported by the conn unit, then the high order bit is set to 1, with all other bits set to 0 (for
example, the last eight bytes of the returned value might be: 80 00 00 00 00 00 00 00).
TABLE 23 connUnitLinkUnitTypeY end devices
Storage system Storage sub-system Unknown Other
Direct Access
Sequential Access
Write-Once
CD-ROM
Optical Medium Changer
Array
SES Unknown Anything else (printer
device, processor
device, scanner, and so
on)