Dell POWEREDGE M1000E - Manual (Page 254)

236 Fabric OS MIB Reference
53-1001768-01
ConnSet group
8
ConnSet group
Implementation of the Connectivity group is mandatory for all systems.
uNumber 1.3.6.1.3.94.1.1
The number of connectivity units present on this system (represented by this agent). Might be a
count of the boards in a chassis or the number of full boxes in a rack.
The connectivity unit is mapped to a switch. uNumber is always set to 1.
systemURL 1.3.6.1.3.94.1.2
The top-level URL of the system; if it does not exist, the value is an empty string. The URL format is
implementation dependant and can have keywords embedded that are preceded by a percent sign
(for example, %USER).
The following are the defined keywords that are recognized and replaced with data during a launch.
FcEventSeverity Integer 1 (unknown)
2 (emergency) Emergency status.
3 (alert) Alert status.
4 (critical) Critical status.
5 (error) Error status.
6 (warning) Warning status.
7 (notify) Notification status.
8 (info) Informational status.
9 (debug) Debug status.
10 (mark) All messages logged.
FcUnitType Integer 1 (unknown)
2 (other) None of 3–14.
3 (hub) Passive connectivity unit supporting loop protocol.
4 (switch) Active connectivity unit supporting multiple protocols.
5 (gateway) Unit that not only converts the interface but also encapsulates the frame into
another protocol. The assumption is that there are always two gateways connected together:
for example, FC <-> ATM.
6 (converter) Unit that converts from one interface to another: for example, FC <-> SCSI.
7 (hba) Host bus adapter.
8 (proxy-agent) Software proxy agent.
9 (storage-device) Disk, CD, tape, and so on.
10 (host) Host computer.
11 (storage-subsystem) For example, RAID, library.
12 (module) Subcomponent of a system.
13 (swdriver) Software driver.
14 (storage-access-device) Provides storage management and access for heterogeneous
hosts and heterogeneous devices.
TABLE 22 Definitions for FCMGMT-MIB (Continued)
Type definition Value Description