Dell POWEREDGE M1000E - Manual (Page 151)

Fabric OS MIB Reference 133
53-1001768-01
entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1
4
Suppose a bridge is realized on a particular module and all ports on that module are ports on this
bridge. A mapping between the bridge and the module would be useful, but additional mappings
between the bridge and each of the ports on that module would be redundant (since the
entPhysicalContainedIn hierarchy can provide the same information). If, however, more than one
bridge was utilizing ports on this module, then mappings between each bridge and the ports it
used would be appropriate.
Also, in the case of a single backplane repeater, a mapping for the backplane to the single repeater
entity is not necessary.
Not supported.
entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1
Information about a particular logical entity to physical equipment association. Note that the
nature of the association is not specifically identified in this entry. It is expected that sufficient
information exists in the MIBs used to manage a particular logical entity to infer how physical
component information is utilized.
Not supported.
Index entLogicalIndex
entLPPhysicalIndex
entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1
The value of this object identifies the index value of a particular entPhysicalEntry associated with
the indicated entLogicalEntity.
Not supported.
entAliasMappingTable 1.3.6.1.2.1.47.1.3.2
This table contains zero or more rows, representing mappings of logical entity and physical
component to external MIB identifiers. Each physical port in the system might be associated with a
mapping to an external identifier, which itself is associated with a particular logical entity’s naming
scope. A wildcard mechanism is provided to indicate that an identifier is associated with more than
one logical entity.
Not supported.
entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1
Information about a particular physical equipment, logical entity to external identifier binding. Each
logical entity/physical component pair might be associated with one alias mapping. The logical
entity index might also be used as a wildcard (Refer to
“entAliasLogicalIndexOrZero
1.3.6.1.2.1.47.1.3.2.1.1” on page 134 for details.)
Note that only entPhysicalIndex values that represent physical ports (that is, associated
entPhysicalClass value is “port (10)”) are permitted to exist in this table.