Dell POWEREDGE M1000E - Manual (Page 182)

164 Fabric OS MIB Reference
53-1001768-01
Flash administration
5
Flash administration
The next six objects are related to firmware or configuration file management. Due to security
restrictions, firmwaredownload and configuration file upload and download are not supported
through SNMP.
swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11
The operational status of the flash. This OID cannot be used for either Firmwaredownload or
Configdownload (cannot be set and isread-only). The value displayed is always "swCurrent (1)".
swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12
The desired state of the flash.
The host is specified in swFlashDLHost.0. In addition, the user name is specified in
swFlashDLUser.0 and the file name specified in swFlashDLFile.0.
Values Possible values are:
• swCurrent (1) The flash contains the current firmware image or configuration file.
• swCfUpload (3) The switch configuration file is to be uploaded to the host specified.
• swCfDownload (4) The switch configuration file is to be downloaded from the host specified.
• swFwCorrupted (5) The firmware in the flash is corrupted. This value is for informational
purposes only; however, setting swFlashDLAdmStatus to this value is not allowed.
For more information about the firmwareDownload, configDownload and configUpload commands,
refer to the Fabric OS Command Reference.
swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13
The name or IP address (in dot notation) of the host to download or upload a relevant file to the
flash.
This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is
read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is
not supported in v6.0.0 and higher versions.
swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14
The user name is used on the host for downloading or uploading a relevant file, to or from the flash.
This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is
read-only) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is
not supported in v6.0.0 and higher versions.
swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15
The name of the file to be downloaded or uploaded.