Dell POWEREDGE M1000E - Manual (Page 128)

110 Fabric OS MIB Reference
53-1001768-01
fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1
3
Index fcFxloginModuleIndex, fcFxloginFxPortIndex, fcFxloginNxPortIndex
fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1
Identifies the module containing the Fx_Port for which this entry contains information.
fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2
Identifies the Fx_Port within the module. This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The value remains constant for the identified
Fx_Port until the module is reinitialized.
fcFxlogiNxPortIndex 1.3.6.1.3.42.2.1.2.4.1.3
The object identifies the associated Nx_Port in the attachment for which the entry contains
information.
fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4
The version of FC-PH that the Fx_Port has agreed to support from the fabric login.
fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5
The total number of buffers available for holding Class 1 connect-request Class 2 or Class 3 frames
to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from
Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective
fcFxPortBbCreditModel.
fcFxPortNxPortRxDataFieldSize 1.3.6.1.3.42.2.1.2.4.1.6
The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest
Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of
bytes in the range 128 to 2112, inclusive.
fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7
Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of
services and the Fx_Port has granted the request.
fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.8
A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and
the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported.
Values Possible values are: