Dell 5110cn Color Laser Printer - Manual (Page 104)

Connectivity Technology Wireless
Compliant Standards 802.11b/802.11g
Bandwidth 2.4GHz
Data Transfer Rate 11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
11b mode: 11, 5.5, 2, 1 Mbps
Device Type Wireless Printer Adapter
Security 64(40-bit key)/128(104-bit key) WEP Encryption/WPA/WPA2
To use the Wireless Printer Adapter, an optional multi protocol card is required.
If an optional multi protocol card is not installed, be sure to install it by following the steps in " Installing a
Multi Protocol Card ".
Make sure that the printer is turned off and unplug all cables including the power cord from the rear of
the printer. 1.
Remove the upper screw on the wireless port cover from the back side of the controller card. 2.
Remove the cover from the controller card by the handles. 3.
Check that the Wireless Printer Adapter is positioned with the USB mark on the top, and then insert the
adapter until it stops. 4.
Check that the Wireless Printer Adapter cap is positioned with the mark facing up, and then attach
the cap until it clicks.
5.