Dell 5110cn Color Laser Printer - Manual (Page 360)

Feed paper from the tray loaded with MxNmm defined by users.
Possible range specified:
Width: 88.9 to 220 mm
Length: 139.7 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users.
Possible range specified:
Width: 3.50 to 8.50 inches
Length: 5.50 to 14.0 inches
If this option is not specified or the tray specified tray is not available, feed paper from the
default tray.
-y toner_save
Turns on the save toner mode for printing. The print result will be fainter than that of normal
printing.
-y nc=n
Specifies the number of output copies (the value of copies must be a positive integer). If this
option is not specified, 1 will be selected.
-y cl
Specifies that printing be collated. If the copies option is not specified, this option will be
ignored.
-y ps
The input file will be processed as the PostScript file. If the file does not begin with %!, %! will
be output to the beginning line. If a file contains %!, this option will be ignored.
-y msi
Specifies multipurpose feeder.
-y m=type
Specifies multipurpose feeder Paper Type.
Available multipurpose feeder Paper Types are as follows.
B
FinePaper/Bond/Plain Paper 2
BB
FinePaperBack/Bond/Plain Paper 2 - Side 2
P
Stationary/Plain/Plain Paper 1
PB
StationaryBack/Plain/Plain Paper 1 - Side 2
R
Recycled Paper
RB
RecycledPaperBack/ Recycled Paper - Side 2