Dell 5110cn Color Laser Printer - Manual (Page 255)

a.
Right-click Wireless Network Connection and select Properties. b.
Select the Wireless Network tab. c.
Click Advanced. d.
Do either of the following: e.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Select the setting that you send to the printer in the list in Preferred Network group. f.
Click Move up to move the setting to the top of the list. g.
Click OK to close the Property dialog box. h.
For Windows Vista:
Open Control Panel. a.
Select Network and Internet. b.
Select Network and Sharing Center. c.
Select Connect to a network. d.
Select the original setting from the network items listed in Connect to a network, and then
click Connect. e.
On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the printer to
which the wireless setting is set, and then click Install. 11.
NOTE: If your system has any of the following operating systems:
Windows XP x64
Windows Server
® 2003 x64
Windows Vista x64
Windows Vista x86
,skip step 12 and go to step 13.
If you select the I am setting up this printer on a server check box on the Select Printer screen
and also select the PostScript Driver check box on the Enter Printer Settings screen, the Adobe
Systems Inc. License Agreement screen appears. Select the I accept the terms of the license
agreement option button, and then click Install. 12.
On the Congratulations! screen, click Finish to complete the installation. A test page will be printed
with the installed printer by clicking the Print Test Page button. 13.