Dell 5110cn Color Laser Printer - Manual (Page 228)

· Verify that the print media is within the printer specifications.
· The fuser is old or damaged. Replace the fuser. See "
Replacing the Fuser
and Separator Roller ".
· The imaging drum is out of order. For example, paper is jammed between
the imaging drum and fuser. Contact Dell. See "Contacting Dell" in the
Owner's Manual.
Toner spots appear on the
page/printing is blurred. · Check the toner cartridge to make sure it is installed correctly.
· Change the imaging drum. See "
Replacing the Imaging Drums ."
· The developer is damaged. Contact Dell. See "Contacting Dell" in the
Owner's Manual.
· The fuser is damaged. Contact Dell. See "Contacting Dell" in the Owner's
Manual.
Entire page is white. · Make sure the packaging material is removed from the toner cartridge.
· Check the toner cartridge to make sure it is installed correctly.
· The toner may be low. Change the toner cartridge. See "
Replacing the
Toner Cartridge ."
· The developer is damaged. Contact Dell. See "Contacting Dell" in the
Owner's Manual.
· The raster output scanner (ROS) is broken. Contact Dell. See "Contacting
Dell" in the Owner's Manual.
· The drive assembly developer is damaged. Contact Dell. See "Contacting
Dell" in the Owner's Manual.
· The controller card is damaged. Contact Dell. See "Contacting Dell" in the
Owner's Manual.
Streaks appear on the page. · The toner may be low. Change the toner cartridge. See " Replacing the