Dell 5110cn Color Laser Printer - Manual (Page 183)

1.
Press until Report/List appears, and then press or . 2.
Press until either PCL Fonts List or PS Fonts List appears.
Select PCL Fonts List to print a list of the fonts available to the PCL.
Select PS Fonts List to print a listing of the fonts available to the PostScript® 3™.
3.
Press . 4.
The message PCL Fonts List Printing or PS Fonts List Printing appears and remains on the operator
panel until the page prints. The printer returns to the Ready to Print state after the font sample list prints.
Using the Print and Hold Function
When you send a job to the printer, you can specify in the driver that you want the printer to hold the job in
memory or hard disk. When you are ready to print the job, you must go to the printer and use the operator
panel menus to identify which job in the memory or hard disk you want to print. You can use this function to
print a confidential job (Secure Print), delay printing a job (Store Print), or verify one copy before printing
additional copies (Proof Print).
NOTE: The printer holds the job until you delete it by using the operator panel or you turn off the
printer. The data on memory is cleared when the printer is turned off. The data on the optional hard
disk is not cleared even when the printer is turned off.
NOTE: Print and Hold functions require a minimum of 384 MB available printer memory or hard disk.
Also, you need to configure the RAM disk settings on the operator panel and the printer driver.
NOTE: Depending on the documents, its job may be too big for the available memory. In this case, an
error occurs.
NOTE: If a document name is not assigned to your print job in the print driver, the job's name will be
identified using the PC's time and date of submission to distinguish it from other jobs you have stored
under your name.
Printing and Deleting Held Jobs
Once held jobs are stored in printer memory or hard disk, you can use the printer operator panel to specify
what you want to do with one or more of the jobs. You can select either Secure Print and Proof Print
from the "
Stored Print ." Then, you select your user name from a list. If you select Secure Print, you must
type the password you specified in the driver when you sent the job. See " Secure Print " for more
information.
From either the Secure Print, Store Print and Proof Print menu items, you have three choices:
Del after Print
Print and Save