Dell 5110cn Color Laser Printer - Manual (Page 45)

Directory:
PServer
Mode Selects this option when using Directory: PServer Mode.
Tree Name* 1 Specifies the tree name up to 32 alphanumeric characters.
Configure this item only when Directory: PServer Mode or
Directory: RPrinter Mode is selected.
Context Name Specifies the context name of the Print Server Object up to 255
alphanumeric characters. Configure this item only when
Directory: PServer Mode.
File Server Name* 1 Specifies the file server name up to 47 alphanumeric characters.
Configure this item only when Bindery: PServer Mode is
selected.
Polling Interval Sets the time interval from when print data enters the print queue
until printing starts. The setting range is from 1 to 1000 seconds.
The original setting remains valid if no input is made. Configure
this item only when Bindery: PServer Mode or Directory:
PServer Mode is selected.
NCP
Packet
Burst On Uses NCP packet burst.
Off Does not use NCP packet burst.
Password Sets the print server password up to 32 alphanumeric characters.
Confirm Password Enter the password again.
Status Information Displays the status of NetWare.
SLP Active Discovery Select the check box to enable Active Discovery.
*1 The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.),
comma (,), yen mark (¥), back slash (\), double quotation ("), comparison symbols (< >), brackets ([ ]),
operation symbols (+, =, or ~), pipe (|), slash (/), and space ( ).
NOTE: The settings in the NetWare page will be valid only when NetWare or the printer is rebooted.
Click the Restart printer to apply new settings. button to apply new settings.
NOTE: An optional multi protocol card is required to display the NetWare page.
SMB
Purpose:
To configure detailed settings for SMB.
Values: