Dell 5110cn Color Laser Printer - Manual (Page 269)

e.
f.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Click Add to display Wireless network properties. g.
Enter the setting that you send to printer and click OK. h.
Click Move up to move the setting to the top of the list. i.
Click OK to close the Property dialog box. j.
NOTE: When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
Open Control Panel. a.
Select Network and Internet. b.
Select Network and Sharing Center. c.
Select Connect to a network. d.
Select the setting you send to the printer from the network items listed in Connect to a
network. e.
Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area. f.
Click Close in the dialog box after confirming the connection is a success. g.
Wireless Setting through Dell Printer Configuration Web Tool
- Advanced setup
Access point (Infrastructure, DHCP network)
Create new wireless settings for your computer. 1.
NOTE: If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel. a.
b.
c.