Dell 5110cn Color Laser Printer User Manual
Page 40
Ethernet*
1
Ethernet
Settings
Auto
Detects Ethernet transmission rate and the duplex settings
automatically.
10Base-T
Half-Duplex
Selects 10Base-T Half-Duplex as the default value.
10Base-T
Full-Duplex
Selects 10Base-T Full-Duplex as the default value.
100Base-TX
Half-Duplex
Selects 100Base-T Half-Duplex as the default value.
100Base-TX
Full-Duplex
Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings
Displays the current settings of Ethernet.
MAC Address
Displays the printer's MAC address.
Port
Settings
LPD
Select the check box to enable the LPD.
Port9100
Select the check box to enable the Port9100.
IPP*
2
Select the check box to enable the IPP port.
WSD
Select the check box to enable the WSD port.
FTP
Select the check box to enable the FTP port.
SMB*
2
Select the check box to enable the SMB.
You can also configure the transport protocol to be used.
TCP/IP and NetBEUI can be selected simultaneously as the
transport protocol.
NetWare*
2
Select the check box to enable the NetWare port. You can also
configure the transport protocol to be used. IPX/SPX and
TCP/IP can be selected simultaneously as the transport
protocol.
AppleTalk*
2
Select the check box to enable the AppleTalk port.
Bonjour (mDNS)*
2
Select the check box to enable the Bonjour (mDNS) feature.
E-Mail Alert
Select the check box to enable the E-Mail Alert feature.
SNMP Agent
Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP
and IPX can be selected simultaneously as the transport
protocol.
IPX is only available when the multi protocol card is installed.
*
1
The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
*
2
An optional multi protocol card is required to display these items.