Dell 5110cn Color Laser Printer - Manual (Page 160)

Good
Indicates good signal strength.
Acceptable
Indicates marginal signal strength.
Low
Indicates insufficient signal strength.
No Reception
Indicates that no signal is received.
Reset Wireless
Purpose
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless
network settings are reset to their default values.
TCP/IP
Purpose:
To specify the TCP/IP settings. The change becomes effective after the printer is turned off and then on
again.
Values:
IP Mode* 1 Dual Stack
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Mode
Uses IPv4 to set the IP address.
IPv6 Mode* 3
Uses IPv6 to set the IP address.
IPv4 Get IP
Address AutoIP*
Automatically sets the IP address.
BOOTP
Uses BOOTP to set the IP address.
RARP
Uses RARP to set the IP address.
DHCP
Uses DHCP to set the IP address.
Panel
Enables the IP address entered on the operator panel.