Disable microsoft, Print and check the printer settings page – Dell 5110cn Color Laser Printer User Manual

Page 246

Advertising

USB Printing

A local printer is a printer attached to your computer or a print server using a USB or parallel cable. If your
printer is attached to a network and not your computer, see "Setting Up Network Printing" in the Owner's
Manual.

Setup Network

NOTE:

To use this printer in a UNIX or Linux environment, you need to install a UX Filter or Linux

Driver. For more information on how to install and use these, refer to your User's Guide.

NOTE:

When using a CD drive in a Linux environment, you need to mount the CD according to your

system environment. The command strings are mount/media/cdrom.

NOTE:

For additional network set-up configurations, refer to your User's Guide.

Disable Microsoft

Windows Vista or Windows XP Firewall

Before Printer Software Installation

NOTE:

This step may not be necessary if you have Windows XP Service Pack 2 installed.

If your multifunction printer is connected directly to a network and the built-in operating system firewall is
enabled, you cannot view your networked printer(s) when you run the Dell™ printer installation software. To
prevent this situation, disable the built-in operating system firewall before you install the Dell printer
software. To disable or enable your built-in operating system firewall, perform the following steps:

NOTICE:

Dell recommends that you enable your built-in operating system firewall after you install

the printer software. Enabling the built-in operating system firewall after you install the printer
software does not limit the use of your network printer.

Click the Start button and click Help and Support.

In the Search box, type firewall and then click the green arrow.

In the Pick a Task list, click Enable or disable Internet Connection Firewall and then follow the
instructions on the screen.