Dell 5110cn Color Laser Printer - Manual (Page 154)

Use the Wired Network menu to change printer settings affecting jobs sent to the printer through a wired
network port.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after
the printer is turned off and then on again.
Values:
Auto*
Detects the Ethernet settings automatically.
10Base Half
Uses 10base-T half-duplex.
10Base Full
Uses 10base-T full-duplex.
100Base Half
Uses 100base-TX half-duplex.
100Base Full
Uses 100base-TX full-duplex.
TCP/IP
Purpose:
To specify the TCP/IP settings. The change becomes effective after the printer is turned off and then on
again.
Values: