Dell 5110cn Color Laser Printer - Manual (Page 173)

Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not
specified for the print job that is sent to the printer.
Value:
Black*
Prints in the black and white mode.
Color
Prints in the color mode.
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation
printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error. The change becomes effective
after the printer is turned off and then on again.
Values:
On*
Prints an error message before it discards the job.
Off
Discards the print job without printing an error message.
NOTE: This instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-Out
Purpose: