Dell 5110cn Color Laser Printer - Manual (Page 258)

a.
b.
Select the Wireless Network tab. c.
Make sure the check box for Use Windows to configure my wireless network settings is
checked. d.
Click Advanced. e.
Do either of the following: f.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Click Add to display Wireless network properties. g.
Enter the setting that you send to printer and click OK. h.
Click Move up to move the setting to the top of the list. i.
Click OK to close the Property dialog box. j.
For Windows Vista:
Open Control Panel. a.
Select Network and Internet. b.
Select Network and Sharing Center. c.
Select Connect to a network. d.
Select the setting you send to the printer from the network items listed in Connect to a
network. e.
Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area. f.
Click Close in the dialog box after confirming the connection is a success. g.
On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the printer to
which the wireless setting is set, and then click Install. 11.
NOTE: If your system has any of the following operating systems:
Windows XP x64
Windows Server
® 2003 x64
Windows Vista x64
Windows Vista x86
,skip step 12 and go to step 13.
12.