Dell 5110cn Color Laser Printer - Manual (Page 36)

Authenticate Error Trap Displays the status of the Authenticate Error Trap.
IPsec Settings Protocol Displays the protocol status.
IKE Displays to use a preshared key for IKE authentication.
IKE SA Lifetime Displays the lifetime for IKE SA.
IPsec SA Lifetime Displays the lifetime for IPsec SA.
DH Group Displays the DH group.
PFS Displays the PFS status.
Remote peers IPv4
address Displays the IP address to connect to.
Remote peers IPv6
address Displays the IP address to connect to.
Non IPsec communication
policy Displays the status of the Non IPsec communication
policy feature.
IP Filter
(IPv4)*
5
Access List Displays the list of IP addresses that are permitted or
denied access to the printer.
* 1 The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
* 2 When you use wired LAN, Ethernet is displayed. When you use wireless LAN, Wireless LAN is displayed.
* 3 An optional wireless printer adapter is required to display the Wireless settings.
* 4 An optional multi protocol card is required to display these items.
* 5 This item is only available for LPD or Port9100.
NetWare Setup Page
Purpose:
To verify the current settings of IPX/SPX and Netware. In this page, you can only verify the settings of items.
If you want to change the settings, go to the pages in the Print Server Settings tab.
Values: