Dell 5110cn Color Laser Printer User Manual
Page 241
7.
8.
Press the middle button, SELECT, once Envelope is displayed on the lower line, this puts a * by it.
9.
Now we have the MPF Size set to Envelope.
10.
Now press MENU to get back to Tray Settings/Paper Size.
11.
Press
to get to Paper Type.
12.
Press
to select Paper Type.
13.
Press
to get to MPF.
14.
Press
to select MPF.
15.
Using
and
, select the appropriate paper type (Plain 1).
16.
Press SELECT, once Plain 1 is displayed on the lower line.
17.
Now we have the MPF Type set to Plain 1.
18.
Now press MENU to get back to Ready to Print
19.
Now insert the Envelope-sized stack of paper into the MPF.
20.
On the screen MPF/Envelope will appear.
21.
Press SELECT to confirm this.
22.
Now on the screen MPF/Plain 1 will appear.
23.
Press SELECT to confirm this.
24.
We now have all the hardware settings on the printer correct
25.
Now, all software settings screen shots are from WORD, this was done in Word 2003. However if in any
application, you go File
Print and then click the Properties button, you will get this same driver
properties window.
Open up Word and create a new document.
26.
Go to File
Print.
27.
Select the Dell Color Laser Printer from the printers list
28.
Click the Properties button to the right.
29.
This brings up Driver Properties.
30.
Click on the Paper Tray Tab.
31.
Change the Paper Source to MPF.
32.
Click the Print Setup Tab.
33.
Select in paper size, Envelope.
34.
35.