Dell 5110cn Color Laser Printer - Manual (Page 163)

Bonjour (mDNS)* 1 Enable*
Enables the Bonjour (mDNS) port.
Disable
Disables the Bonjour (mDNS) port.
HTTP-SSL/TLS* 1 Enable*
Enables the HTTP-SSL/TLS port.
Disable
Disables the HTTP-SSL/TLS port.
*1 Only displayed when an optional multi protocol card is installed on the printer and the optional wireless
printer adapter is not installed on the card.
IPX/SPX
Purpose:
To configure the IPX/SPX settings. The change becomes effective after the printer is turned off and then on
again.
Values:
Auto*
Automatically sets the frame type.
Ethernet II
Uses the Ethernet II frame type.
Ethernet 802.3
Uses the IEEE802.3 frame type.
Ethernet 802.2
Uses the IEEE802.2 frame type.
Ethernet SNAP
Use the SNAP frame type.
NOTE: The IPX/SPX menu is only displayed when an optional multi protocol card is installed on the
printer.
IP Filter (IPv4)
Purpose:
To specify the reception of data from certain IP addresses for blocking. You can set up to five IP addresses.
The change becomes effective after the printer is turned off and then on again.