Dell PowerEdge M600 - Manual (Page 104)

104
Installing Blade Components
Figure 3-6. Inside a Full-Height Blade (PowerEdge M805 Shown)
Closing the Blade
CAUTION:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Ensure that no tools or parts are left inside the blade.
2 Align the notches in the edges of the enclosure with the cover alignment
pins on the inner sides of the cover.
1 optional mezzanine card 1 -
Fabric C 2 optional mezzanine card 2 -
Fabric B
3 optional mezzanine card 3 -
Fabric C 4 optional mezzanine card 4 -
Fabric B
5 SD card location 6 processor CPU2 and heat sink
7 processor CPU2 and heat sink 8 hard drive 1
9 hard drive 0 10 hard-drive backplane
11 processor CPU1 and heat sink 12 video riser card
6
1
7
8
9
11
2
3
4
10
5
12