Dell PowerEdge M600 - Manual (Page 72)

72
About Your System
Memory address
line failure at
address , read
value expecting
value .
Memory double word
logic failure at
address , read
value expecting
value .
Memory odd/even
logic failure at
start address to
end address .
Memory write/read
failure at
address , read
value expecting
value .
Faulty or improperly
installed memory modules,
or faulty blade board. Ensure that all memory
modules are properly
installed. See
"Troubleshooting Blade
Memory" on page 191. If the
problem persists, see
"Getting Help" on page 217.
Memory mirroring
enabled.
Memory mirroring
enabled Information only.
Memory tests
terminated by
keystroke.
The spacebar or ESC key
was pressed during POST
to terminate the memory
test. Information only.
Table 1-18. Blade Messages (continued)
Message Causes Corrective Actions