Dell PowerEdge M600 - Manual (Page 210)

210
System Board Information
7 connector for the 3.0-V coin battery
NOTE:
Access requires removal of system board. See
"Removing the System Board" on page 150.
8 J_STORAGE Storage controller card connector
9 Hard-drive backplane connector
10 Hardware key socket for integrated NIC TOE/iSCSI
feature
11 CPU1 Processor 1 socket
12 A1 – A8 memory modules A1 – A8
13 video controller card connector
14 MEZZ1_FAB_C Mezzanine card connector1 Fabric C
15 MEZZ2_FAB_B Mezzanine card connector 2 Fabric B
16 MEZZ3_FAB_C Mezzanine card connector 3 Fabric C
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
"Glossary" on page 219.
Table 7-6. PowerEdge M805 System Board Connectors (continued)
Connector Description