Lcd module, Removing the lcd module – Dell PowerEdge M600 User Manual
Page 175
Advertising
Installing Enclosure Components
175
3 Reinstall the control panel using the two screws.
4 Reinstall the bezel. See "Installing the Enclosure Bezel" on page 169.
5 Install the blades. See "Installing a Blade" on page 98.
LCD Module
Removing the LCD Module
CAUTION:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Rotate the LCD module so that the underside of the module faces
upward. See Figure 4-11.
Advertising