Dell PowerEdge M600 - Manual (Page 51)

About Your System
51
Half-Height Blades (PowerEdge M600 and M605)
For a half-height blade in bay n:
• The integrated NIC will connect to I/O module A1, port n and I/O module
A2, port n.
• Mezzanine card B will connect to I/O module B1, port n and I/O module
B2, port n.
• Mezzanine card C will connect to I/O module C1, port n and I/O module
C2, port n.
For example, in a blade in slot 12, the integrated NIC will connect to I/O
module A1, port 12 and I/O module A2, port 12.
Figure 1-17 shows the port connections for a half-height blade in bay 1 with
two mezzanine cards.
Table 1-13. Example of I/O Module Port Assignments - Half-Height Blade 1
Blade 1 I/O Module
A1 B1 C1 C2 B2 A2
Integrated LOM Port 1 Port 11
Mezzanine
Card C Port 1 Port 1
Mezzanine
Card B Port 1 Port 1